Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories

Wolf Tooth Components Valais Dropper Post Seat Bag Adaptor
$24.95
While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter
Wheels Manufacturing Inc. Headset Cup Press
$137.50
Wheels Mfg Headset Cup Press is a robust, and easy to use tool made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. One drift is machined with multiple steps to fit common head tube inner diameters. The other drift is two-sided to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings. - Machined aluminum handles and drifts - Red anodized drifts and handles - Zinc-plated 1/2" diameter threaded rod - Long threaded rod works with long head tubes up to 250mm - Includes one Head Tube Drift - Includes one Headset Cup Drift - Laser etched for easy identification - Made in the USA
Wheels Manufacturing Inc. Hub Bearing Installation Drift Set
$95.00
This 23-piece Wheels Mfg. drift set is used to install 10mm and larger inside diameter sealed bearings, using a press with 3/8" diameter rod - Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000, and 6001 bearings - 10mm ID hole, for use with Wheels Manufacturing PRESS-1 or PRESS-4 bearing press handles
Wheels Manufacturing Inc. Universal Bottom Bracket Drift
$18.50
The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)
Wera 8004 Zyklop Metal Ratchet
$57.42 - $66.99
Zyklop Metal ratchet with switchover lever. Slim design for work in even very confined spaces. The 72 fine-pitched teeth allow a small return angle of 5 degrees. Comes with a switchover lever for convenient direction change and secure socket locking function. Forged, full metal ratchet (chrome-molybdenum steel) for particularly high robustness and long service life.
Wald Wald Training Wheels 1216
$22.99
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
WPL Wet Chain Lube
$8.99
WPL Wet Chain Lube is a premium bio-based chain lube providing efficient pedaling and long-lasting performance to cyclists of all disciplines. Formulated specifically for wet conditions and long-distance riding, proprietary Emulsifite technology allows for easy cleaning of the chain after long rides by dissolving under high-pressure water. The concentration of Emulsifites in the lube has been fine tuned to resist puddle and rainwater but to activate under high-pressure water from a hose. All you have to do is spray your chain with water after your ride, and the accumulated dirt and grime will disappear. - Premium bio-based formula made with natural ingredients - Emulsifite technology provides dynamic cleaning abilities and prevents black goop build-up - Long-lasting formula improves pedal efficiency by reducing chain wear and friction - For use on bicycle chains, shifters, derailleurs and cables - Biodegradable, non-toxic, PTFE-free formula is environmentally friendly
Tri-Flow Superior Lube
$5.99 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Topeak JoeBlow Max HP Floor Pump
$44.95
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.
Teravail Daydreamer Purist Water Bottle
$15.00
The Daydreamer bottle adds a little whimsy and a lot of hydration to your rides. - BPA-free plastic - 100% FDA food-grade materials - Non-solvent base (UV cured) CPSC-approved ink - Volume: 22oz
Surly Dr. Chromoly's Elixir Purist Water Bottle
$14.50 - $15.00
We teamed up with Dr. Chromoly to lift your spirits and hydrate your body with this premium water bottle. Fill it with whatever elixir you like, safe in the knowledge that nothing will stick to the bottle’s interior—not stains, not mold, and definitely not any remnants from your last visit to the Bloody Mary Bar.
Sunlite Laser Streamers
$5.99
• Mounts inside handlebar grips • Optional hand-held use
Stan's NoTubes 2oz Tire Sealant Injector
$9.95
Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!
Stan's NoTubes Dart Tool
$24.99
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
SRAM DOT Disc Brake Assembly Grease
$11.00
DOT Disc Brake Assembly Grease is specially formulated for DOT-fluid brake systems. - Recommended for lever pistons, hose compression nuts, threaded barbs, and olives
SRAM eTAP Battery Charger
$45.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTap Battery
$55.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
SKS Digital Airchecker
$36.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
SKS Raceblade Long
$64.99
This ultra long clip-on mudguard set for road bike tires (up to max. 25mm width) protects you, whether you’re riding your road bike in a warm summer rain or on solitary winter trips. The end of each mudguard extends to below the hub axles. This length ensures a full coverage, meaning you, and also the cyclist behind you, are spared from splashing. They can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Once the metal mounting brackets are fitted to the bicycle, the mudguards can be clipped on and off in seconds making them ideal for use as needed. Brackets attach at brake bolts and skewers. - End of each fender extends to below the hub axles - Length ensures full coverage for the user and those riding in proximity - Can be adapted to the radius of the wheel by adjusting the length of the stays
SKS Shockblade II (29-inch)
$29.99
Keep water and mud off you with SKS's Shockblade front fender! The super tough, dual-compound plastic is ready for the miles, on road and off. The Shockblade works with most rigid and suspension forks as well as disc and linear-pull brakes.
SKS Shockboard/Shockblade & Dashboard Hardware Kit
$12.99
Shockboard / Shockblade & Dashboard hardware kit (for 2nd bike)
RockShox Air Can Service Kit
$10.00 - $23.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
RockShox Fork Service Kit
$17.00 - $39.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
RockShox MTB ZEB Fender
$20.00
Don't let the weather get in the way of adventure. The RockShox branded ZEB short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at three points and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties. - 3-bolt mounts make for easy installation - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with all ZEB models
RockShox Reverb Stealth A2 200-Hour or 1-Year Service Kit
$79.00
This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 non-Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool
Rock-N-Roll Extreme Bike Chain Lube
$6.50 - $16.99
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
Revelate Designs Tangle Frame Bag
$90.00
The Legendary Tangle frame bag is the original half frame bag, it offers substantial cargo capacity in a sleek, rectangular shape that fills unused space on your bike. Designed to fit a variety of bike frames, these bags can be used for everyday riding, commuting, and adventuring. Stash your food, tools, and a mini pump and you're ready to go anywhere. Features: - Zipstretch construction - Pairs a bomber, wetsuit style molded-tooth zipper with Revelate's exclusive stretch Cordura panels that reduce zipper stress when closing bag - Exit port in main compartment for hydration tube or wires - Zippered left side pocket with dividers organizes small items - Urethane-coated webbing attachments won't absorb water or grit - Daisy chain front top tube attachment accommodates any top tube bag configuration - Padded with closed cell foam along all tube sections - Internal pump straps along top tube - Low-profile cam-lock buckles - Made in the USA with domestic and imported materials Sizing: - Small: top length 17.5", overall height 4" - Medium: top length 19.75", overall height 4.5" - Large: top length 21", overall height 6.5" To check that the Tangle leaves room for water bottle mounts, measure the vertical height from the bottle top to the bike’s top tube and compare to the the listed bag height. A little bit of overlap is ok, side-entrance water bottle cages are preferable. Specifications: - Materials: VX21 X-pac, 1050-denier domestic ballistics nylon, 420-denier diamond ripstop lining, closed cell foam padded tube sections
Planet Bike Shockmate 3.0 Suspension Pump
$40.00
High-pressure shock pump with gauge Our Shockmate 3.0 high-pressure bicycle suspension pump is designed to efficiently and accurately maintain your bike’s suspension to ensure that your shocks are neither too stiff nor too soft. It's compact and rugged and features an 8" swivel hose and alloy valve head for secure attachment and easier pumping. The easy-to-read gauge and bleeder valve help you fine-tune the suspension sag on your bike's front and rear shocks to give you the best ride performance. Whether you have a mountain bike with full suspension or just a fork shock, take the Shockmate 3.0 along on your next backcountry adventure. - Compact and rugged design is ideal for backcountry adventures - Locking T-handle for comfortable and efficient pumping at high pressure - 8" swivel hose and alloy valve head for secure attachment and easier pumping - 1.5" industrial grade gauge is precise and easy to read when setting suspension shock sag - Bleeder valve for fine-tuning pressure - Rebuildable - Length: 260mm - Weight: 149 grams
Park Tool Adjustable Wrench
$36.95
Big and powerful, Park's Adjustable Wrench is forged from steel and chrome plated for maximum durability. Its jaws open up to 36mm and the torque-friendly, 12-inch handle is vinyl dipped for comfort.
Park Tool Bottom Bracket Tool
$28.95
Precision CNC machined aluminum tool for the installation and removal of 12-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 46mm 12-notch OD cup - Race Face® Cinch™, Rotor® BSA30, Zipp® Vuma™, Hawk Racing™ BB3086™, and more
Page 1 of 4 Next page